Baldor Electric Company

Servo Rated Gearheads
Baldor's low backlash GBSM-series of gearheads mount easily and directly onto the BSM C-series and N-series servo motors. These gearheads are designed for servo applications requiring precision, durability, and long trouble-free operation. The GBSM-series are planetary gearheads, which provide very high power transmission capability, torque multiplication, speed reduction and inertial matching. These are high efficiency gearheads. The standard GBSM gearheads are available in five different case sizes, which fit directly onto the five sizes of Baldor’s BSM servo motors. Mounting takes less than 2 minutes.

DC Gearmotors
Baldor DC Gearmotors are available in 90 & 180 volts in both right angle and parallel shaft designs with industry standard mounting configurations. The Right Angle single reduction units feature an Internal Expansion Bladder and Mobil® SHC634 Synthetic oil for long maintenance free operation. The Internal Expansion Bladder keeps the lubrication free of contaminates by eliminating the need to vent the gearbox and allows all position mounting. This feature is exclusive to Baldor.

Electra-Gear

• Aluminum Alloy for Lightweight, High Strength, Thermal Conductivity, and Corrosion
  Resistance
• Platinum Finish Standard
• Hardened Alloy Steel, Precision Rolled or Ground Worm Shaft Standard
• Heavy-Duty Bearings for High Capacity and Long Life
• Tin Bronze Worm Gear for High Efficiency and Strength
• Precision Ground Alloy Steel Output Shaft
• ENC Shafting Optional
• Spring-Loaded, Dual-Lipped Elastomer-type Oil Seals
• Plugs & Vents: Multiple Plugs for Universal Mounting, 5 or 15 PSI with Breathers Standard
• Available in Integral or C-Face Coupling Design

Alumax Gear Drives

• Platinum Finish Standard
• Aesthetically clean look
• Torque Ratings Equal or Exceed Competitors
• Lightweight, High Strength
• High Thermal Conductivity
• Corrosion Resistant
• Non-Toxic
• Optional, Low-Cost ENC (Nitro Carbonized) Surface Treatment For Hardware & Shafts
• Ideal for Food and Beverage Industry
• Optional Platinum Plus Surface Treatment for Severe Wash down Applications

Stainless Steel Gear Drives

• 304 Grade Cover and Housing Withstands Harsh Environments
• 303 Stainless Steel Output Shaft Provides Long Life
• Compensation System Keeps Internal Pressure Down, Oil in the Box and Contaminants Out
• Double Lip Seals Offer Superior Performance in Harsh Environments
• USDA H2 Approved Synthetic Lubricant Never Needs to Be Changed
• O-Ring Sealed Covers Provide For Positive Lubrication Retention
• Worms are Cut, Heat-Treated, Ground, and Polished to Provide Efficient, Quiet Operation
• External Hardware All Stainless Steel

Electra-Max High Efficiency Helical In-Line Gear Drives

• CNC Machined High Grade Rugged Cast Iron Housing
• Foot or Flange Mounts Interchangeably with Several Major Competitors
• Power Matched C-Faced Motors And Reducers For Maximum Torque and Efficiency
• High Alloy Steel Gears And Shafting

Emerson/US Motors

Grove Gear

• Compact narrow design fits new or existing space allocations
• Double lip seals provide increased life and resistance to high temperatures, abrasion and chemicals
• Input/output o-ring covers provide positive sealing
• Non-compressible metal shims maintain factory settings and gear alignment throughout product life
• Unique quill seal guard protects against input seal damage during motor installation
• Cast iron housing offers rigidity & strength in harsh environments
• Single cover output ensures gear centering for maximum efficiency and quiet operation
• Hardened, ground and polished worm cut integral with shaft provides maximum efficiency with minimum noise
• High quality bronze provides long, trouble free operation with maximum efficiency
• Steel mounting base provides superior strength and rigidity
• Vent shield splash guard prevents oil escape through vent plug
• Metal name plate is drive screw attached to ensure easy field identification
• Oil filled at factory to ensure proper lubrication type and level
• 100% run and leak tested

Helical Gear Reducers

Helical Inline

• Six sizes available in reducer and gearmotor designs
• Input horsepower ratings up to 104HP
• Available in double, triple and quadruple reduction with ratios from 2.2:1 to 3700:1
• Output flange design available in all sizes

Helical Bevel

• Five sizes available in reducer and gearmotor designs
• Input horsepower ratings up to 53HP
• Available in triple and quintuple reduction with ratios from 6.2:1 to 3400:1
• Solid output shaft and hollow output shaft available in all sizes
• Precision carburized and hardened spiral bevel gearing for quiet, efficient, right angle speed reduction

Helical Worm

• Four sizes available in reducer and gearmotor designs
• Input horsepower ratings up to 17HP
• Available in double, triple and quadruple reduction with ratios from 7:1 to 3400:1
• Solid output shaft and hollow output shaft available in all sizes
• Hardened and ground steel worm shaft and high capacity bronze alloy worm gear give you the advantages of worm gearing with the efficiency of helical gearing

Worm Gear Speed Reducers - Stainless Steel

• Grade Cast Stainless Steel Housing and covers withstand the harshest environments
• Output shaft is 303 Stainless Steel for long rust resistant life
• Internal compensating system keeps pressure down, oil in the box and contaminants out
• Double lip Stainless Steel seals offer superior performance in harsh environments
• USDA H2 approved synthetic lubricant never needs to be changed
• O-ring sealed covers for positive lubrication retention
• Stainless Steel nameplate drive-screwed to housing for easy identification
• Non-compressible Stainless Steel shims keep factory bearing settings constant
• Worms are cut, heat-treated, ground, and polished to provide efficient, quiet operation
  External hardware all Stainless Steel

Leeson

Sterling Electric, INC